; ;

Because of the stricter preventive regime declared from the state, we had to minimise the work in the company quarters. For this reason we will not be able to guarantee the support service as before. We will try to answer you as much as we can in the given situation. The replies that require the testing will have most delays. We kindly ask for your understanding.

Mini Dimmer

Solutions regarding Qubino Mini Dimmer

Tested bulbs with Mini Dimmer
Below you can find the PDF document in case the document don't load properly you can view or download it here. Check this article if you're ...
Thu, 2 Apr, 2020 at 9:07 AM
Wiring the Mini Dimmer - electrical diagrams
3-wire installation The Mini Dimmer can be wired with the L line from the device or the L line from the installation. 2-wire installation The...
Mon, 17 Feb, 2020 at 11:11 AM
Mini Dimmer vs. Flush Dimmer
The main differences of the two Qubino dimmers are summed up in the table below. Mini Dimmer Flush Dimmer Dimensions (WxHxD)  38 x 33,5 x 15,5 mm...
Mon, 27 Apr, 2020 at 9:53 PM
I can't dim the light with the bi-stable (normal, ON/OFF) switch
While the Dimmer is set to work with the on/off switch the dimming with the switch is not possible the dimmer will fade between 0 and the previously set non...
Wed, 6 May, 2020 at 1:12 PM
The signalization light is ON in green, and I can’t include the Mini Dimmer.
If the signalisation light on the Mini Dimmer is green, it means that the device is included in the gateway. In case the Mini Dimmer is not included in the ...
Wed, 6 May, 2020 at 1:34 PM
Testing: Minimum load power
Mini Dimmer was tested on loads with different power [Watts].  In a 3-wire installation, the minimum power of the load tested was 1W and the load was st...
Thu, 9 Apr, 2020 at 11:49 AM
Can I control the Mini Dimmer with a wall dimmer?
No. The Mini Dimmer already dims the light (regulates the power) and must be connected to the power supply constantly. A physical dimmer will change the pow...
Wed, 15 Apr, 2020 at 2:25 PM
How to select a dimmer mode or switch mode
The dimmer mode and the switch mode are selected changing the Parameter 5 – Working mode. The default value is set to 0 - dimming mode. If you want the dim...
Wed, 15 Apr, 2020 at 2:59 PM
Does Mini Dimmer support OTA?
Mini Dimmer doesn’t support over-the-air (OTA) software updates. Updates can be done through a custom tool and software. We can do the update for free; you ...
Wed, 6 May, 2020 at 1:37 PM
Mini Dimmer’s signalisation light is too bright
In our first software release, Mini Dimmer doesn’t have an option to switch off the signalisation light on the product, which in some cases, may be disturbi...
Wed, 15 Apr, 2020 at 1:38 PM